GODIAG GT105 OBD2 Break Out Box OBD Assistant ECU IMMO Prog AD ECU Connector Converts Car Battery to 12V DC Power

GODIAG GT105 OBD II Break Out Box With Immo, Break Out Box is safe and easy to use. Break Out Box Has auxiliary detection communication, used to detect whether there is communication between the vehicle and the vehicle. Note: This product is discontinued, you can choose GODIAG GT105 II to relpace. Why choose GODIAG GT105 OBD II Break Out Box： 1. A full-protocol ECU connection line for ECU programming power adjustment 2.OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules. 3. Standard OBD2 independent PIN4, PIN5. 4. Pure copper female seat supports repeated insertion and removal and has a long service life. 5. Battery clip treated with environmentally friendly salt spray, with a thickness of 0.5mm. 6. DC line adopts 0.75 square millimetres 2-core sheathed line. 7. The DC connector has a resettable 7A fuse. 8. Safe and easy to operate for IMMO: to avoid disassembling the ECU of FORD, Mitsubishi, Volkswagen for short-circuit.9. Assist in the detection of communication: When you use a device to test on a car and it indicates that there is no communication, then you can use GT105 OBD assistant to plug into the car, detect whether there is communication between the car and the GT105 OBD assistant. If there is no problem with the communication between the car and GT105,  maybe your device is faulty or not supported. About GODIAG GT105 OBD II Break Out Box: GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. Since the power source of the product can be converted from a battery to a DC12V power supply, it can also be used to charge some tablets or supply power for independent diagnostic equipment.    The product is equipped with PWM (PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. When there is data communication, the corresponding protocol indicator will flash, therefore the communication status can be judged and you can also determine whether the diagnostic programming device can communicate. The product is suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment. The device provides OBD2 independent PIN4 body GND, PIN5 signal GND, which is convenient for some modules to be used for special programming. In addition, with the OBD2 full protocol ECU programming cable, users can also connect the ECU in the studio to adjust the ECU programming power. The device has PWM (PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. When there is data communication, the corresponding protocol indicator will flash. Users can judge the communication status, and also can judge whether the diagnostic programming device can communicate. With GODIAG GT105 OBD II Break Out Box, you can: IMMO AD power adapter function. After 2016,  for Ford all smart keys were lost, GT105 cooperates with VVDI equipment (OBDSTAR, AUTEL,) and other anti-theft matching equipment to program the keys. All car keys lost matching—wake up the meter or wake up the anti-theft ECU. (Support VAG 4th and 5th generation anti-theft, Toyota ECU synchronization, auxiliary Mitsubishi all key lost matching or all lost remote control key setting, old Porsche Cayenne car for anti-theft key learning.) VPW, CANH, CANL, K-Line indicator lights can judge the communication status between the vehicle and the diagnostic programming device.  (If the product is used to connect the device, the user can simply judge whether the diagnostic programming is normal or not according to whether the device can send communication.) The GT105 power adapter cable obtains 12V power from the car battery. (For programming equipment such as Xhorse Key Tool Plus Pad, VVDI Prog, CGDI Prog, IM608, etc., it provides 12V power supply when they need power outdoors, to read the data of BM-W BENZ anti-theft ECU, or another car ECUs, and finally realize the on-site maintenance of outdoor faulty vehicles. ) Provide a 12V power supply for the key cutter (12V). Standard OBD2 full protocol ECU programming line. (With MPPS, FGTech, Kess v2, etc., for ECU data reading and writing, ECU cloning, ECU tuning, etc.) (Note: OBD2 full protocol ECU programming line is purchased separately) Do you know what the GODIAG GT105 OBD II Break Out Box indicator means?   Package Includes: 1pc x GODIAG GT105 Host 1pc x Power Cord with Battery Clip