Microtronik NEW HexProg Programmer Device with BDM Function

Microtronik NEW HexProg Programmer Device with BDM Function, ECU cloning/tuning function will be free for 30 days after that you need to buy MK6707 for ECU cloning. Note: ECU cloning/tuning function will be free for 30 days. Hexprog Key Features 1. Master version. One License for all protocols On bench and OBD. 2. Supports one of the largest Ecu/Tcu list in Cars and Trucks. 3. Reads all BM-W long ISN from B-MW DME and DDE including MD1 and MG1 in F/G series. 4. Supports online services like IMMO OFF, DPF OFF, EGR OFF, Addblue,…etc. 5. All adapters and modules are included when you order Hexprog. Hexprog vs Hexprog II – Key Differences: Hexprog (1st Gen): Supports BMW CAS read/write function Hexprog II (2nd Gen): ✔ Expanded vehicle coverage: Adds Bikes & Tractors✔ More ECUs supported:・Toyota -275036-5650・VD56・DCM7.1AP Both models maintain core programming functions Hexprog Functions 1. On Bench Chip Tuning You can read and write P-Flash, D-Flash, External Flash, and external EEPROM with the option of automatic checksum correction, you will have two methods in most of Ecus: Factory mode: with this option you don’t have to open the Ecu cover. Just plug some wires for power and signals and you are ready to go. Boot mode: Opening the Ecu is mandatory to connect the boot wire on the Ecu board. This method is useful when the Ecu is not responding. 2. OBD Chip Tuning Hexprog starts supporting OBD functions in early 2021, It supports reading/write the map area, (virtual read is supported too). It also includes important functions in some Ecus, like VIN Changing, Coding backup/restores and Fault codes read/erase. Microtronik has a huge experience in all types of car Ecus flashing and coding, we deployed this experience in Hexprog to produce one of the safest programming tools by OBD. 3. BM-W ISN Reading We took the most important part from Autohex for ISN management and we adopt it in Hexprog. With Hexprog you can read all long ISN from any B-MW Ecu including the latest Bosch MG1/MD1 Ecus starting from 2005 up to today’s DME/DDE. 4. BDM read/ write- The safest tool to read CAS and other Immobilisers With Hexprog you are able to break the protection of immobilizers like CAS in B-MW, EIZ/EIS in B-enz, BCM in Volkswagen and P-orsche…etc. 5. Built-in Editors- With Hexprog you can modify EEPROM contents on the fly With Hexprog you can edit many Flash data like: Edit CAS3 VIN, ISN and keys Edit CAS4, CAS4 VIN, and ISN Edit mileage for B-MW instrument clusters 6. Repair B-MW FRM-With Hexprog you can repair B-MW FRM in one click B-MW E series has a serious problem with FEM, the data gets damaged easily. With Hexprog you can repair the FRM 3 in one click. 7. other functions: You can reset mileage in protected EEPROMs like M35080, M35160, 080D0WQ, 160D0WQ, the process takes few seconds You can do key reset for many brands like A-udi, BM-W, MINI, Porsche, Toyota, Fiat, Renault…etc. Read/Write a wid range of SOP8 EEPROMs. Works side by side with Autohex to make keys. Compare to Hextag: Both Hextag and Hexprog have exactly the same functions. The difference is in the hardware structure. Below table shows the major differences. Using Hexprog you can do the following: Ecu cloning/tuning of wide range of brands (Check Supported List). This function is free for 30 days, details are in F.A.Q. Read and write safely CAS2,CAS3, CAS3 , CAS4, CAS4 all flashs without removing any component. Read and write safely Porsche BCM without removing component Repair corrupted EEPROM in CAS3 Edit CAS3 and CAS4 ISN and VIN Reset mileage for CAS Repair FRM in just one click Read and write many other modules in different car models like Mercedes Benz, A-udi, Land Rover, V-W,..etc Dashboard EEPROM Reset like M35080, 080D0WQ, 160D0WQ,… Key Renew for many brands like A-udi, BM-W, Porsche, Land Rover, V-W, Chrysler, REN,… Packing List  Hexprog Ecu Programming main unit. Hexprog Power module used for Ecu Cloning/Tuning function. MPC5XX Module used for Ecu Cloning/Tuning of EDC16XX BDM Cable (wires are same quality used in aerospace). OBD Cable for read/write Ecu MAP area. Module/adapter for renew keys and read/write SOP-8 EEPROM. SOP-8 High quailty Clip to read/write EEPROM and reset mileage on bench. Key reader/writer module, used for reading key status as well as making keys with Autohex Custom Power Supply Adapter 12.5V 2A (starting from 2021.