Purifier Reverse Osmosis 4000 GPD 500LPH Basic

Description The PRO4000G-P Commercial Water Purifier (0.5T Engine Precision) is an elite industrial filtration solution that integrates high-volume reverse osmosis with advanced pre-treatment technology. This commercial water purifier is designed to produce 500 liters per hour, utilizing a precision filter housing equipped with three 20-inch 5-micron PP cotton cores to eliminate fine sediment before the water enters the RO membranes. Managed by an intelligent PLC program controller, this commercial water purifier provides real-time diagnostic feedback, using green and red indicator lights to signal normal operation or fault status. This sophisticated commercial water purifier features a dual-control interface, allowing operators to toggle between manual and fully automatic modes depending on site requirements. With a built-in pure water conductivity meter, this commercial water purifier ensures total quality control by displaying the precise mineral content of your filtered water at all times. The system is powered by a high-efficiency 1.5KW high-pressure pump that maintains a steady 0.7MPa working pressure for optimal membrane performance. Safety and durability are central to the PRO4000G-P Commercial Water Purifier, which includes a low-voltage protection switch to prevent the pump from running during water shortages. Housed in a heavy-duty stainless steel frame, this commercial water purifier utilizes a 4040-type RO membrane shell to ensure maximum contaminant removal. It is also equipped with automated rinsing solenoid valves that periodically clear concentrated water from the membranes to prevent fouling. By selecting this commercial water purifier, you are securing a high-capacity, “all-in-one” treatment plant that delivers consistent, professional-grade purity for any commercial application. Features & Specifications Precision Pre-Filtration: Includes a 3-core 20-inch 5-micron filter to trap impurities larger than 5 microns. High-Volume Output: Designed as a 0.5T system capable of delivering ±500 Liters Per Hour. Intelligent PLC Controller: Features automated machine component monitoring and fault signaling. Industrial Pump Power: 1.5KW, 220V 50HZ high-pressure pump with a 72m head capacity. Quality Analysis: Integrated conductivity meter for real-time pure water analysis. Automated Maintenance: Features programmed RO membrane rinse cycles via a dedicated solenoid valve. What’s in the Box? Your PRO4000G-P Commercial Water Purifier includes the stainless steel 0.5T main engine frame, an integrated precision filter housing with three PP cores, a 4040 RO membrane and stainless steel shell, a 1.5KW high-pressure pump, the PLC control box with a conductivity meter, a full set of flow meters, and dual pressure gauges for raw and post-membrane monitoring